Walk-in Temperature humidity test chamber, environmental Chamber, conditioning unit
Walk-In Temperature humidity test chamber, this environmental chamber is able to simulate a wide range of conditioning environments.Capable of testing large components, widely used for automobiles, IT Equipment or any large item.
Internal capacity: From 2m3 to 100m3
Model no.: L-WK series
Temperature range:-70℃ ~120℃
Humidity range：30% – 95%RH （10%RH for optional）
Specifications for Walk in temperature humidity test chamber, environmental chamber
|Temperature range||Type 20: -20℃～+80℃, Type 40: -40℃～+80℃,Type 70: -70℃～+80℃|
|Temp fluct./ deviation||±0.5℃ / ±2.0℃|
|Humidity range/ dev.
(For WKH model only)
|30%～98%RH / ±3.0%RH(>75%RH)，±5.0%RH(≤75%RH)|
|Heating time||-20℃→+80℃， -40℃→+80℃ ，-70℃→+80℃|
|Cooling time||+20℃→-20℃≤40min Ram rate: 1℃/min,3℃/min, 5℃/min etc. can be custom-deisigned as per requests.|
|+20℃→-40℃≤60min Ram rate: 1℃/min,3℃/min, 5℃/min etc. can be custom-deisigned as per requests.|
|+20℃→-70℃≤90min Ram rate: 1℃/min,3℃/min, 5℃/min etc. can be custom-deisigned as per requests.|
|Control method||Balanced Temperature (Humidity) Control Method|
|Enclosure||Colour coated sheet matel|
|Internal||Stainless steel SUS304|
|Insulation material||Hard urethane foam|
|Heater||Nichrome Electronic Heater. Heater control mothed: PID + SSR contactless control|
|Cooling method||Mechnical single stage refrigeration system, Air cooled system (For type 20, type 40). Cascade refrigeration system, Air cooled system (For type 70)|
|Compressor||Hermetically sealed compressor|
|Refrigeratant||R404A(For type 20, type 40) / R404A/R23(For type 70)|
|Displayer||5.7″ or 7″ touch screen programmable controller|
|Running method||Program running, fix running|
|Setting method||Touch screen|
|Program capacity||120 patterns. Max. 999 segment max. per patterns. 99 times repeats|
|Display resoluation||Temp：0.1℃；Time：0.1min, Humidity: 0.1%RH 时间：0.1min；|
|Control method||PID, Balanced Temperature Humidity Control|
|Water supply method||Water pump|
|Water quality||Deionized water or distilled water, resistance>500Ω·m|
|Auto-feeding||Auto-feeding available, feed water quality: Dimineralized water, feeding water pressure: 0.2~ 0.4MPa|
|Power supply||AC220(±10%)V Single phase + E, 50Hz, AC380(±10%)V (50±0.5)Hz 3 phase +N +E|
|Standard accessories||Test hole (Φ50 or Φ100 ) 1pc，Specimen holder 2 sets, Timer 1pc, Power supply cable, 1pc|
|Safety protection devices||Leakage breaker，Over heat protector，Fan over heat protector，Compressor over heat protector，Compressor over pressure protector，Phase Error alarm, Water low protection (For TH2 model only)|
|Remarks: 1.Above data is measured under ambient temperature is 25℃, relative humidity is 85%RH, without specimen, and keep two hours constancy temperature.
2.Except the above specifications, all non-standard requirements can do according to customers specified requirements.
3, Manufacturer has the right to change the above data without noticed.
- Modular design, reliable quality, easy maintenance
- Welding vibration line using silver solder with silver content more than 45%, improve reliability and decrease leakage.
- Pure copper pipes and special design evaporator and condenser
- Refrigerant pressure gauges are installed
- Refill port for easily maintenances and service
Programmable touch screen controller
- 5.7 inch or 7 inch TFT color LCD display
999 programs capacity, 99 segment per pattern, and 99 times loop function.
- RS485 communication interface, controller can be fully compatible and controlled through computer, communicate software will be provided
- Graph display function
- SD memory card, max. data storage capacity is 750 days by default (sampling interval is 5min)
Graph & Recording function
Graph recording and reviewing, enable user to monitor the testing status clearly.
Powerful programming capacity:
Pattern & Segments: 120 pattern / max. 1200 segments, max.999H 59M 59S can be set.
Computer controlling complicable
RS485 communication interface, controller can be fully compatible and controlled through computer, communicate software will be provided
After communicated with computer, the controller can be fully controlled, edited, monitored on remote controller.
Paperless recorder (Optional):
-Brightness and clarity display,
640*480 TFT-LCD, 256 colors
-Touch screen display
-Fast record data search
-Provous data search during recording
-Convenient message function
-High quality and function stable
-Build-in chamber ability
Specimen power supply control terminal, T/S signal control
T/S signal control available for specimen power supply
Adjustable build-in over temperature protection
2.1 Installation site conditions
Install this test chamber in a place which satisfied the following conditions
2.1.1 Ambient conditions
Ambient temperature range： 5～35℃；
Humidity range ： ≤85%RH
Atmospheric pressure： 86～106KPa；
Air quality： Haven’t high concentration dust and corrosive gas
Floor requirements： Flat, level floor with good ventilation
For the purpose of future easily ventilation, operation and maintaining, please install the test chamber according to below space requirements:
It needs space more than 800mm from 4 sides of test chamber.
It must have sufficient access space to ensure the door can be opened. Please do not put any objects on the front side of door, as the hot steam may damage the objects.
2.2 Power supply
2.2.1 Power supply
Check main power supply for the equipment (the diameters of electrical wire, power switch etc.) comply with below requirements:
Frequency and fluctuation: 50±0.5Hz；
2.2.2 Ground wire
Connect the test chamber to ground can avoid electric shock and reduce the noise caused by improper running.
2.2.3 Connect power supply cable
Connect the mains power supply cable of test chamber to the external electricity power supply (Check the phase consequence, current, and power consumpation clearly before connection).
3.1 Does your factory has the ability to design according to different specifications?
Yes, we can design the walk in chamber which exactly meet your test requirements, including temperature and humidity, weathering etc.
3.2 In order to get the chamber which meet my requirements, which kind of requirements I should pay attention to?
In order to design the walk in chamber which exact meet your requirements, please let us those requirements at least:
Internal dimension, or specimen dimensions, temperature range, humidity range, ramp rate (if applicable).
3.3 What’s the lead time?
Normally, for a walk in chamber,the lead time is 2 month after deposit received.
3.4 What’s kind of payment method you accepted?
In our factory, the payment term is T/T 30% downpayment before production, and T/T 70% before shipment. If different payment method required, please contact with our sales.
3.5 What’s kind of price term I can work with you?
We accept EXW, FOB Guangdong, CIF destination port.